If we assume that the nominal starting current is 600% of full load current, then the resulting inrush current during starting is about 180 a/156 a respectively. If we assume that the nominal starting current is 600% of full load current, then the resulting inrush current during starting is about 180 a/156 a respectively.

NEMA Contactors and Starters General Purpose USA

### In this case we are delevering only 230v each winding.

**Wye delta starter inrush current**. Both types are diagrammed in accompanying illustrations. Closed transition starters do not permit this peak to occur. The initial connection should be in the star pattern that results in a reduction of the line voltage by a factor of 1/√3 (57.7%) to the motor and the current is reduced to 1/3 of the current at full.

If we assume that the nominal starting current is 600% of full load current, then the resulting inrush current during starting is about 180 a/156 a respectively. Wye delta starter inrush current. Wye delta starter inrush current.

Approximately 30 a at 400v or 26 a at 480v. Approximately 30 a at 400v or 26 a at 480v. When the start command is issued, contactor 1m is closed, connecting the motor in a wye configuration.

Wye delta starter inrush current.

NEMA Contactors and Starters General Purpose USA

19++ When does the new season of blue bloods start in the