Air impact wrench longer bolts for the puller (may be required)1 remove four bolts to the starter idler cover. Cover the hole (case side) that is open to the transmission to stop debris from entering.
Once all are loose, remove them.
Raptor 660 starter clutch removal. Take front plastic off take top and bottom motor mount bolts off use a crowbar and lift motor after taking oil lines and radiater hoses off then take side cover bolts out and nove the cover off slowly you will have to wiggle and turn it to get it out then u can take it from there. If you removed the wiring. Remove the left case cover.
Remove four bolts to the starter idler cover. Remove the small idler gear and set aside with the cover. Remove the small idler gear and set aside with the cover.2 remove the left case cover.
Nothing really informative to see but posted up for the hell of it to go with the other 2 vids about installing a new one. Raptor 660 starter clutch removal/install pt. Also clean the shaft surface and make sure all debris is removed.
Raptor 660 starter clutch removal/install pt. Yamaha raptor 660 flywheel removal. How do you remove starter clutch on yamaha raptor 660r?
Raptor 660 starter clutch removal. Clean both surface carefully and wipe clean with rubbing alcohol. I need to replace the clutch in the g/f's rappy and i have looked through the shop manuals and have a real good idea on how to do it, but does anyone have any.
If playback doesn't begin shortly, try.