Get someone to pull the starter rope or engage the starter and the compression should push your finger off the spark plug hole. Tried with the spray trigger off.
Diagnosing why the craftsman power washer would not start and the easy simple fix, also discovered the pump outlet extension was cracked and profusely leakin.
Craftsman ready start pressure washer won't start. What to do if your craftsman power washer won’t start. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. If, after pulling the cord, your power washer won’t start, there are several possible reasons why.
Purchasing a craftsman pressure washer leaves you safe in the knowledge that you've got yourself a quality piece of equipment. Set switch to 1, connected water line, discharged air, made sure there was a steady water stream, left the spray trigger on while i pulled the starter. The carburetor might be clogged.
Remove the spark plug and hold your finger or thumb on the hole the spark plug screws into. You need to decide if the problem is no fuel or no spark. It features an amazing engine created by briggs & stratton, which just makes your everyday home cleaning tasks easy.
Set switch to 1, connected water line, discharged air, made sure there was a steady water stream, left the spray trigger on while i pulled the starter. When the engine on your pressure washer won't start, follow these troubleshooting tips to fix the problem: We will go through the possible issues and fixes for them.
4 answers from these members: A clogged carburetor is most commonly caused by leaving fuel in the pressure washer for a long period of time. Left a little in over winter, and filled with fresh.
This sticky fuel can clog up the carburetor and prevent the engine from starting.